Wire Shielding Tinned Copper Braid Ground Strap Electric Wire Cable Shielded Lot

Description

Features:
Tinned Copper material for EMI, RFI and ESD Protection
Flexible and expandable braid design.
For automotive and industrial use.
Suitable for use in shielding electric cable from abrasion and radio frequency interference
Greater than 99 percent pure copper
Uninsulated braided strand wire with tin plated coating
Resistant to failure from flexing
Meets QQ-W-343 standards for uninsulated annealed copper wire
Flame Rated: VW-1 | For automotive and industrial use: engine tubes and hoses, cable and wire protection | Cut with shears
RoHS Compliant
High end automotive, heavy equipment and industrial applications have always used braided metal for secure and efficient grounding solutions. Our braided tinned copper is a perfect combination of economy and durability, and will provide many years of use even in exposed applications.
When installed, Metal Braid provides full coverage and is great for covering and protecting hoses on hot rods and motorcycles.
Tinned Copper Flat provides excellent shielding efficiency and easy radial termination. Both durable and flexible, it can be used to create a low resistance point-to-point ground strap.
The braid is also an ideal solution to providing additional shielding to cables in retrofit applications.
Our metal braid sleeving is made from tinned copper which provides great EMI, RFI and ESD protection as well as cut and abrasion resistance. Strong metal fibers made from tinned copper create our Metal Braid Sleeving that can be used in automotive applications to dress-up engines, hose support or wire protection. With a flexible weave, can easily be cut with shears, covering cables, hoses, tubes and more... it can be quickly installed for that custom professional look.
【TINNED COPPER PREVENT RUST MATERIAL】: Our Ground Straps is made of multiple 0.12 mm single bare tinned copper wires with fine weaving density, smooth surface without burrs and no truncation in the middle that Tinning can prevent the copper from oxidizing to produce copper rust, causing poor contact,Corrosion protection,strong fatigue resistance.
【EMI, RFI and ESD PROTECTION】: The braided Tinned Copper Wire metal shielding is used for EMI/RFI interference shielding over electronic signal wiring.Can also reduce hum in guitars,stop an electrical whine in car stereo,Blocks Electrical Interference,shielding for signal wires and audio cables,use for an rf ground.
【HIGH CONDUCTIVITY】: Good Heat Dissipation,Low Heat,Avoid spark splashing caused by overcurrent,standard resistivity,thick&sturdy means safe and reliable,Long service life.
【WIDELY USED】: Uninsulated braided strand wire,Shielding Interference, Earth straps, Engine Ground Cables,provides a "Faraday cage".For automotive and industrial use and common ground straps, earthing cables and current transmission leads.
【Flexible and EXPANDABLE BRAID DESIGN】: Just remember that the more it expands, the more the strands separate, which then you can see through to whatever you are protecting.
Also, make sure to keep the ends together as they will probably fray and you will lose a few inches of sleeving, this is common with most braided sleeving
Thickness: 0.12mm
Melt Point: 1084°C RoHS Compliant VW-1 Rating
Working Range: -60°C - 200°C
This tin-plated copper braid is suitable for use in shielding electric cable from abrasion and radio frequency interference.
This braided tinned copper wire is annealed for improved ductility and meets the QQ-W-343 specification for uninsulated wire.
This copper braid is suitable for use in wire shielding applications such as in coaxial cable.
Electrical wire carries an electric current or grounds an electrical device. The amount of current a wire can carry is proportional to its size (gauge), and the wire is generally sheathed with coatings and coverings to insulate and protect it from moisture, chemicals, heat, and abrasion. Copper is the primary material for electrical wire, but alloys are sometimes used to increase its strength or its resistance to chemicals and the environment. Wire can be composed of a single strand or of many smaller strands, depending on its use, and is typically annealed to improve its ductility. Electrical wire is commonly used in industrial, electronic, and automotive applications.
Strong metal fibers made from tinned copper create our Metal Braided Sleeving that can be used in automotive applications to dress-up engines, hose support or wire protection.
The properties of Tinned Copper Metal Braided Sleeving not only protects against cuts and abrasion, but also Shield EMI, RFI and ESD.
With a flexible weave, affordable prices and can easily be cut with shears, covering cables, hoses, tubes and more can be quickly installed for that custom professional look.
Original(in.)
Maximum Expansion(in.)
1/8"
1/4"
1/4"
1/2"
5/16"
9/16"
1/2"
3/4"
11/16"
1-5/16"
Payment
We accept Paypal/Credit Card payment through Ebay Checkout ONLY. .
Payment must be received within 7 days (from the auction ended date).
Paypal buyers must have a confirmed address as the registered shipping address.
Buyer must use checkout to complete the transaction. Otherwise, it might delay the ordering shipping time
Shipping
All Of Our Item will be sent via USPS.
24~48hours Shipped: We will ship your order out within 24~48
hours.
Local Pickup :We offer Local Pickup with free shipping，you can get your item directly from our warehouse.
Returns
We are offering 30 days return policy for any defect item.Pl
ea
s
e
contact us for help and return details.
All damaged packages must be reported after receiving 5 days.
No claims whatsoever will be accepted if the damage was caused by customer's abuse, negligence, or incorporated installation
Return items must be in original box and include all of the original accessories.
Customer Service
Our working time: 9:00am-6:00pm(Monday to Friday),Please feel free to contact us if you have any question.
Feedback
Your Satisfaction is the best feedback for us,hope give us five stars.
It is very appreciated if you can write a positive review for us.