HUGE LOT OF ~146 NEW PYREX #16 STOPPERS, Lab Glass Pennyhead, Corning 7660-16

Description

Pyrex® Pennyhead Stoppers
ST16, Lot of ~146
General Description
Top-quality product at a tiny fraction of retail.
All stoppers are unused.
The stoppers will be spread among four of the original manufacturer boxes. Part of the lot will be individual bags and the other part will be sealed bags of six. Some of the individual stopper bags (about 23) were not struck properly on the top, therefore the bag did not seal or did not seal fully. As with any new solid stoppers, there may be the occasional small chip or sidewall fissure.
The edges of the ground glass zones are somewhat rounded to reduce chipping.
These are the short taper flask/separatory funnel length stoppers. They will not fit XX/XX numbered glassware or pieces with the longer tapers, such as many reagent bottles
.
This is an incredible deal on these new, top of the line stoppers*.
Diameter at the top of the ground glass taper:
~16.4 mm
Diameter at the bottom of the ground glass taper:
~15 mm
Length of the ground glass taper:
16-17 mm
Mfr.#:
7660-16 (Stamped only with 'PYREX® ST 16').  Corning® pennyhead stoppers are now being sold as #7661.
*Retail:
~,400.00.
Packages of six stoppers retail for 0.70 each (Large lab supplier retail for 7661-16).  Sometimes these six unit products are themselves referred to as cases.
Shipping
Will be packaged in a new 200 lb. burst test shipping box. See the shipping calculator for the cost to send this item alone. Package will weigh 6-7 lbs. Insurance is included in the shipping calculator total.
Insurance:
All orders have insurance automatically included in the checkout/invoice total.
This item will be insured through USPS.
Combined Shipping:
Readily shipped together at a discount. When quantities greater than one are entered into a listing's shipping calculator,
it will likely display a shipping charge that is much higher than what will actually be charged
. This overage may also appear during checkout with purchases of more than one item of the same item number, as well as multiple item number orders, if payment is made before an invoice is emailed. This happens because the system adds all the weights and packaging fees together. It cannot account for all the variables involved in multiple item orders.
Note that with all orders, there is no 'handling charge' - the shipping charge is only composed of our cost in freight, insurance (if applicable) and packaging materials. Please feel free to request a quotation for any combined shipping costs, be sure to include your zip code. An invoice will be delivered more quickly if the 'request total from seller' link is used. When two or more of any item is purchased, even if they are all the same item, please request or wait for an invoice for your purchases.
When two or more of any item is purchased, even if they are all the same item, please request or wait for an invoice for your purchases.
Returns
All items sold are described as accurately as possible. Returns will not be accepted unless the item was grossly misrepresented (for instance, if the wrong item number was sent or the condition is drastically different from that found within the description).
Note that if the item was sealed, it cannot be opened or tampered with. If these criteria are met, please allow an authorization to be sent to you, or the return will not be accepted. In the event of an issue please contact us immediately as returns must be sent out within 3 days of when they are received by the customer. Note that all items are carefully inspected, and matched against the listing before we ship them out. Returns will not be accepted if they show any signs of use, damage, or are not the exact same piece of merchandise that was sent to the buyer.
Disclaimer
Seller's Waiver of Liability:
Many chemical and laboratory processes are dangerous. By your purchase of glassware, labware, or any other equipment you are agreeing to hold harmless the seller and ebay in any event of accident, injury, damage, or loss that may arise, under any circumstance, from the use, storage or resale of said lab items. This applies to both the buyer or any third party.
The conditions of the items are described to the best of our ability, however the seller cannot foresee all possible procedures that the buyer may undertake.
It is the sole responsibility of the buyer to judge the safety of a given procedure and also to assess the compatibility of any lab items with the given procedure. Therefore it is understood that the seller shall not be held liable for damage, injury, or any other loss that may occur from the use of any product purchased.
There are no warranties, expressed or implied, as to the suitability of these products for any given use.
Additional Notes:
-Please inspect all glassware and equipment, for damage upon receipt and prior to use.
-Our previously used glassware is cleaned before sale. However, all glassware should be carefully cleaned before use. Even brand new glassware should be cleaned as it is typically slightly alkaline from manufacture.